Getting Started
Tips and guides on pre-printing tasks.
Visit http://warranty-registration.tinkerine.com/ to register your warranty.
You'll need the serial number located on the back of the printer ...
Thu, 16 Apr, 2015 at 2:09 PM
Applying Tape Onto The Print Surface
Using blue painter’s tape as a printing surface provides us with a medium adhesion material that al...
Wed, 13 Jan, 2016 at 2:40 PM
Leveling The Print Surface
Ensuring that the print surface is properly leveled is one of the most important things to check for during 3D prin...
Thu, 14 Jan, 2016 at 4:24 PM
Measuring The Filament Diameter
Measuring the filament diameter with a digital caliper and inputting that information into Tinkerine Suit...
Mon, 16 Feb, 2015 at 3:41 PM